 |
|
| DPV(S) F45 : |
|
|
| |
| Special Versions : |
 |
 |
Pump with explosion Proof motor |
|
Victaulic coupling |
|
Elastometers either in EPDM or Viton |
|
Connecting Flanges according to ANSI/ JIS |
|
Motor Fanges according ti NEMA |
|
Deareating Plug: Stainless Steel |
|
|
| |
| Motor : |
|
Specially Developed 3 phase motor, 2850 rpm, 50 Hz, IP55 according to IEC standard, Insulation Class F with temperature rise of class B.
|
|
Also available with 1 Phase motor 230V |
|
|
| |
| Seal Specification (as per DIN 24960) : |
| Seal Type |
Bellow Seal |
| Max. working |
Dynamic……….Carbon |
| Pressure (1000 kPa) |
Stationery ……Sil. Carbide |
| Max. working |
Dynamic……….Carbon |
| Pressure (2500 kPa) |
Stationery ……Sil. Carbide |
| Secondary Sealing |
EPDM for DPV &
Viton for DPVS |
|
| For DPV(S)F 24,32,45 motor > 7.5kw and DPV(S) F 65 Seal type-Cartidge |
| Construction : |
|
Vertical multistage centrifugal pump, suitable for slightly aggressive, watery liquids. |
|
Equipped with Ceramic /Tungsten carbide wear resistant liquid lubricated bearings. |
|
Shaft sealing by means of Mechanical seals. |
|
Pump fulfills the latest safety regulation (CE-marking). |
|
Sleeve sealing by means of O – rings |
|
All hydraulic components in Stainless Steel. |
|
Connection in-line. |
|
| |
| Material Specifications : |
| Pump series |
DPV |
DPVS |
| Complete hydraulic assembly (suction and discharge casing, impeller, diffuser, shaft, sleeve and top plate) |
AISI303 (1.4305)
AISI304 (1.4301) |
AISI316 (1.4401)
AISI316L (1.4404) |
| Base plate and motor lantern |
GG25 (GJL-250) |
GG25(GJL-250) |
| (Collar) flange |
GGG40 (GJS-400) |
GGG40 (GJS-400) |
| Elastometers |
EPDPM |
Viton |
| Liquid lubricated bearing |
Ceramic / Tungston Carbide |
Ceramic / Tungston Carbide |
| Dearating and drain plug |
Brass |
AISI316 (1.4401) |
|
| |
| |